| |
|
| E1 to T1 Data Converters |
Our T1 to E1 converter solutions provides
from 8 E1s up to 64 E1 interfaces to "n" x T1's or convert
"n" x T1's to up to 64 E1's. These converters may be installed
in a 19 inch VCL-MegaConnect chassis in any "mix" for converting
"n" x E1 interfaces to "n" x T1 interfaces. (Note: The value
of "n" is in multiples of 8 E1 ports or 8 T1 ports). The converter
provides a simple and cost effective method to convert a T1
stream to an E1 stream.
The E1 to T1 (or T1 to E1) converter provides 8 ports per
E1/T1 card. Each 8 port T1 card converts to 8 E1's and vice-versa.
The converter provides redundant power supply and mounts in
a 19-inch 6U shelf. Up to 64, T1 to E1 converters may be installed
in a single 19-inch shelf. The converters may be accessed
by the user for configuration and monitoring through a Windows
based GUI that is shipped with the system. It may be also
accessed remotely over a TCP-IP network. |
|
| |
| T1 to E3 Converters |
|
We offer T1 to E3 and E3 to T1 converters. Also available are
E1 to T1, E1 to DS3, Ethernet to E1, T1, E3 and DS3 Converters.
Our T1 to E3 and E3 to T1 converter
solutions provides up tofrom 8 E1 to 48
T1 interface to E3 and E3 to up to 48 T1's. These converters
may be installed in a 19 inch VCL-MegaConnect chassis in any
"mix" for converting "n" x T1 interfaces to E3 interfaces.
(Note: The value of "n" is in multiples of 8 T1 ports). The
converter provides a simple and cost effective method to convert
a T1 streams to an E3 stream.
|
|
| |
 E1
to DS3 Converters |
Our E1 to DS3 and DS3 to E1 converter solutions
provides up to from 8 E1 to 32 E1 interface to DS3
and DS3 to up to 32 E1's. These converters may be installed
in a 19 inch VCL-MegaConnect chassis in any "mix" for converting
"n" x E1 interfaces to DS3 interfaces. (Note: The value of
"n" is in multiples of 8 E1 ports or DS3 ports). The converter
provides a simple and cost effective method to convert a DS3
stream to an E1 stream.
The converter provides redundant power supply and mounts
in a 19-inch 6U shelf. The converter may be accessed by the
user for configuration and monitoring through a Windows based
GUI that is shipped with the system. It may be also accessed
remotely over a TCP-IP network. |
|
| |
| Ethernet over E3 Converters |
|
We offer Ethernet over E3 converters. Also available are E1 to
T1, E1 to DS3, Ethernet over DS3, T1 to E3, Ethernet to E1
and T1 converters.
Our Ethernet over E3 converter
provides up tofrom 48 x 100Base-FX Ethernet
interface to E3. These converters are installed in
a 19 inch VCL-MegaConnect chassis in any "mix" for converting
"n" x 100Base-FX Ethernet interface
to E3 interfaces. (Note: The value of "n" is in multiples
of 8 ports). The converter provides a simple and cost effective
method to convert an ethernet to an E3 stream.
The converter provides redundant power supply
and mounts in a 19-inch 6U shelf. The converter may be accessed
by the user for configuration and monitoring through a Windows
based GUI that is shipped with the system. It may be also
accessed remotely over a TCP-IP network.
|
|
| |
| Ethernet
over DS3 Converters |
| Wet offer Ethernet over DS3 converters. Also
available are E1 to T1, E1 to DS3, Ethernet over E3, T1 to
E3, Ethernet to E1 and T1 converters.
The VCL-MegaConnect can multiplex and transport
up to 32, 10BaseT Ethernet channels over a DS-3 link. Each
10BaseT Ethernet channel can be "mapped" / "assigned" to a
specific ("n") number of 64Kbps time-slots on the DS3 link
by the user. The maximum value of "N" 64Kbps time slots shall
be 24 (1536 Kbps) of bandwidth for each Ethernet channel.
The converter provides a simple and cost effective
method to convert an ethernet to a DS3 stream.
|
|
|
