| |
|
| E1 Groomer - Hi-Z Non-Intrusive Hi-Impedance
Monitoring Solutions - VCL-MegaConnect |
The VCL-MegaConnect, 32 Port (to monitor in both transmit
and receive directions) E1 Groomer (and T1 Groomer also available)
Hi-Z Monitoring Groomer is also available for special non-intrusive
monitoring (high impedance) applications in which E1 ports
can be connected to monitoring / billing equipment for non-intrusive
monitoring of live traffic or signaling, required by billing
servers etc.
In the monitoring mode the Groomer provides the user a total
of 32, E1 ports. 30, E1 ports shall connect to the “live traffic”
E1 links which are to be monitored, non-intrusively (Hi-Z)
in both transmit and receive directions. 2, E1 ports shall
connect to the monitoring equipment, such as billing servers
etc.
The Groomer (E1 Monitoring DACS) is capable of monitoring
a -20dBdsx (0.3Volt Pulse) E1 signal through a Hi-Z path,
without in any way disturbing the live E1 traffic that is
required to be monitored. The E1 connector(s) shall be RJ45
(120 Ohms) and a "Y" cable is provided (included) to connect
E1 Groomer equipment to the E1 ports that are required to
be monitored.
The user shall have the full flexibility to choose and select
up to a maximum of 30 time-slots (to be monitored in both
transmit and receive direction), through the internal TSI
non-blocking switch, from any of the 30 E1 ports that are
required to be monitored. |
|
| |
 32
port T1 and E1 Groomer - Hi-Z Non-Intrusive Hi-Impedance Monitoring
Solution |
VCL-MegaConnect, the T1 or E1 x 32 port Hi-Z Monitoring
Groomer is available for special non-intrusive monitoring
(high impedance) applications in which T1 or E1 ports can
be connected to monitoring / billing equipment for non-intrusive
monitoring of live traffic or signaling, required by billing
servers etc.
In the monitoring mode the Groomer provides the user a total
of 32, T1 or E1 Ports. 32, T1 ports shall connect to the “live
traffic” T1 links which are to be monitored, non-intrusively
(Hi-Z) in both transmit and receive directions. 4 additional
T1 or E1 ports shall connect to the monitoring equipment,
such as billing servers etc.
The Groomer (T1 Monitoring DACS) is capable of monitoring
a -20dBdsx (0.3Volt Pulse) T1 or E1 signal through a Hi-Z
path, without in any way disturbing the live T1 or E1 traffic
that is required to be monitored. The T1 or E1 connector(s)
shall be RJ45 100 Ohms (for T1) and 120 Ohms for E1 and a
"Y" cable is provided (included) to connect T1 (or E1) Groomer
equipment to the T1 (or E1) ports that are required to be
monitored.
The user shall have the full flexibility to choose and select
up to a maximum of 24 time-slots (to be monitored in BOTH
transmit and receive direction), through the internal TSI
non-blocking switch, from any of the 24 T1 ports that are
required to be monitored. |
|
| |
| E1 DACS - 16 Ports VCL-MegaConnect-Jr. |
The E1 DACS Groomer (and T1 Groomer) 16 Port Digital Access
Cross Connects is available for applications including
access cross-connect, Hi-Z (high impedance) monitoring, automatic
protection switching (1+1 APS).
The VCL-MegaConnect-Jr. 16 Port E1 Digital Cross-Connect
Switch, is an E1/T1 digital cross-connect switch, which presents
its user an easy to use, yet a sophisticated platform to cross-connect
up to 16, E1/T1 ports. The VCL-DACS, E1/T1 Digital Cross-Connect
Switch offers full cross-connect functionality to cross-connect,
and / or aggregate DS-0s, "n"x64Kbps consecutive data channels
and, Fractional E1/T1 channels to full E1/T1 channels.
Options are available as 16 port T1 DACS, 64 port
E1/T1 DACS and E1/T1 DACS for Non-Intrusive Hi-Z Monitoring
(high impedance) applications. All models are available with
TCP-IP remote access and monitoring facility. |
|
|
|
