P-123 Series 1-5 Port Enclosure,
Size (inside): H-3.2" x W-2.7" x D-1.7"
P-123/S
Single Port Housing, Basic
Protects CATV splitters, splices, and other equipment against
accidental damage, abuse, and weather
Inside Dimensions: H-3.2" x W-2.7"
x D-1.7"
P-123/1Single
Port Housing, 1 post
With single centre ground post to attach two protector modules
Inside Dimensions: H-3.2" x W-2.7"
x D-1.7"
P-123 Single Port Housing, 5 posts
For terminating drop or station wire; hinged cover will not close
while wires are being terminated.
Inside Dimensions: H-3.2" x W-2.7" x D-1.7"
Options: the P-123 can be configured with 1,
2, 3, 4 or 5 internal posts.
Installation Option: for installation on Aluminum
or Vinyl siding, use our GM-79 Mounting
Plate.
Standard color is gray-lid and black-base. Private
labelling and custom colors are available on special order.
P-123/BH Disconnect Housing
With a non-keyed 8 pos. 4 wire jack complete with shorting bars
& 4 terminating posts. The housings have been designed to
comply with a variety of telephone and cablevision environments
and applications. Solidly constructed of rugged, impact-resistant
UV stabilized materials, these enclosures are weather resistant.
They are available in a flame retardant, UL approved rigid Polymer
or a non-flame retardant softer UV stabilized, more economical
poly propylene.
Inside Dimensions: H-3.2" x W-2.7" x D-1.7"
Options: the P-123 can be configured with 1,
2, 3, 4 or 5 internal posts.
Installation Option: for installation on Aluminum
or Vinyl siding, use our GM-79 Mounting
Plate.
Standard color is gray-lid and black-base. Private
labelling and custom colors are available on special order.
P-124
Series 2-Port Tamper Resistant Enclosure, Size (inside):
H-5"
x W-3.55" x D-1.5 "
P-124 2-Port Tamper Resistant
Housing
UV
stabilized material for outdoors use. Protects installations against
damage, abuse and weather. Hinged cover stays open for easy installation,
leaving both hands free; tamper-resistant safety lock P-127
is optional. Standard color is gray.
Options: Available with 1 terminating post and
up to 8 posts, as required. Custom labelling, Security locking
screw, color and custom hardware mounting available on special
orders.
Material:UV stabilized, flame retardant and
rigid resin or a softer more economical polymer.
P-124/5 2-Port Housing, with 5 terminating
posts
Same as P-124 (shown at left), with 5 terminating posts.
P-124/PCBG
PCB and 2 Jack customer mounting features.
GV-79
For installation on Vinyl or Aluminum Siding, use the GV-79
Plate.
P-126
Series 2-Port Multi Purpose Enclosure, (inside): H-5"
x W-4" x D-2"
P-126 2-Port Multi Purpose Enclosure
Manufactured
of UV stabilized material to endure rugged outdoor environments;
protects equipment against abuse and weather. Tamper proof hinge
stays open for ease of installation.
Standard color is gray. Custom hardware mounting available. Private
labelling and custom colors are available on special order.
Options: Customer hardware mounting available.
Private or custom labelling, security locking screw and colors
available on special order.
Installation Options: for installation on Aluminum
or vinyl siding, use GM79 Mounting Plate.
Material:UV stabilized flame retardant rigid
resin or a softer more economical polymer.s
P-126/11 2-Port Housing, with terminating posts
P-126
can be customized with 1 to 12 terminating posts to meet
the requirements of your application: (P-126/11 shown at
right).
P-126/2
2-Port Housing, with 2 posts
To hold up to 4 Protector modules.
P-126RAYCHE
With grounding post and PC board locators
P-126
With customer hardware
P-126D
With custom mounting posts
P-128
Series 2-Port Multi Purpose Enclosure, Size (inside): H-9.1"
x W-4.9" x D-2.75"
P-128 2-Port Multi Purpose Housing, Basic
Manufactured of UV stabilized material to endure rugged outdoor
environments; protects equipment against abuse and weather. Hinged
cover stays open during installations, leaving both hands free.
Standard color is grey.
Options: Available with or without F81 Security
Locking connector. Custom hardware mounting available. Private
or custom labelling, locking screw and colors available on special
orders. 4 leg extenders to raise housing even higher for easy
bottom cable entry. Enclosures are available in UL approved flame
retardant rigid resin or a softer more plyable polymer. Specify
your requirements.
P-128D
With custom mounting posts
P-128/F
With custom hardware
P-129
Series 2-Port Enclosure, Size (inside): H-7.2" x W-4.9"
x D-1.8"
P-129 2-Port Housing, Basic
UV
stabilized material to endure rugged outdoor environments; protects
against abuse and weather. Detachable cover for easy equipment
installations. 5 cable entries in base floor as well as 2 front
entrance grommets, providing a versatile yet economical housing.
P-129/FUE 2-Port Housing, with
F-81 security locking connector
Shown
right, P-129/FUE in a typical CATV installation.
Options: special security screws
Standard color is gray. Private labelling and custom colors are
available on special order.
P-130
Series Multi Purpose Enclosure, Size(inside): H-7.1"
x W-5.55" x D-2.9"
P-130T NID Housing, Basic
This
Single Port Housing is available with locking over-ride to accommodate
telephone or customer access. It will accommodate the P-137
platform for telephone termination devices. The external locking
mechanism allows maximum usage of the interior space, and can
also be used with a F81 security locking connector for CATV applications.
The bottom entrance flange will accept up to a 2" diameter
conduit. Standard color is grey.
P-130T NID Housing, with platform
& override lock
Options:
Private labelling and custom colors are available on special order.
P130 is available in a UL approved flame retardant material or
in a more economical plyable UV stabilized material. The single
port is available with a standard flat grommet, or a 3/4"
or 1" conduit adapter grommet.
P-130/F Single Port Housing,
F81 security locking connector, external sealing gasket, and 2
hex nuts for mounting onto metal prewire housings is included.
Standard color is gray. Private labelling and custom colors are
available on special order.
Shown above, P-130T. Custom hardware
mounting available shown with PlatformP-137.
.
P130OQ Multi-Media Housing
Features:
Weather proof design. Surface or pole mounted. Lid can be
removed if another enclosure is mounted on the left side.
Standard color is grey. Options:
Rear knockouts, F81 security locking system, P137 platform
with 4 PTDs and grounding bar, security bolts & locking
override, conduit adapter, flame retardant or economical
polypropylene materials are available (please specify
application needs). Different Models:
P130, P130F, P130FE, P130OQ, P130T,
P130E, P130P
P-131
SeriesNID Enclosure, Size (inside): H-4.6" x W-4.4"
x D-2.5"
P-131 2 Pair Nid Housing
This multi-purpose multi-media 3 port enclosure may be utilized
as a "2 pair" housing with an inner lid secured by a
security bolt and a locking over-ride for both technician and
customer access. The two compartments can be designed to accommodate
custom termination devices. The section under the inner lid comes
complete with a termination post. This enclosure is ideal for
those telephone installations that do not require multiple lines
into the home.
The overlapping hinged lid provides protection against the elements.
The P-131 is capable of being mounted on the side of a dwelling
or on a pole.
P-131 NID Housing, with custom hardware and custom
labelling
P-131NE without locking over-ride
Options: Custom security screws available. Private labelling,
custom colors and custom hardware mounting available on special
request.
Standard color is grey.
P-136
Series 3-Port Multi Media Enclosure, Size (inside): H-10.5"
x W-7.8" x D-3"
P-136 Multimedia, 3-Port Housing
Offers
a unique hidden hinge, choices of a regular flat
grommet or a 3/4" or 1" diameter conduit adapters and
a variety of compartmental accessories (shown at right).
Options: Custom hardware mounting, custom labelling
and logos available. Security locking screws and colors available
on special orders. P136 is available in a UL approved flame retardant
material or in a more economical, softer, UV stabilized polypropylene.
Available with or without F81 security locking connector. (P-136/F81
shown here)
P-136
P-136 with customer hardware installed
P-136NID With grounding bracket, inner lid & custom hardware
P-136
with inner security door closed and locked with optional locking
device. Shown with 4 protected terminating devices installed. A
segment of the inner lid & the breakaway partition P-136CP,
can be easily removed to accommodate up to 6 PDTs.
The P-136 is an enclosure that can accommodate both Telephone
and CATV simultaneously by inserting dividers. This enclosure
can be mounted on prewire metal housing.
P-136/KIT shown
with Inner Lid, dividers & F81 security locks
P-136 Accessories(shown below)
The P-136 accessories are designed to be used in conjunction with
the P-136 housing to provide the user with a truly "multimedia"
enclosure.
P-136/IL
Inner Lid
Inner lid allows the user to separate customer access from media
access.
P-136/SMP Splitter Mounting Partition
Can
be used in conjunction with the Inner Lid for security or alone
as a mounting plate for CATV splitters.
P-136/CPCompartmental Partition
Break-away
partitional wall can be used to block off the area around the
PTDs to secure the installation.
GASKET External Sealing Gasket
For mounting the P-136, P-130, P-130BT or P-130S onto prewire
metal housing. (part# 1-06-01).
P-136FEXT
Extended
lid to accommodate larger, bulkier accessories. Lid is 1 1/4"
deeper than regular P-136 lid.
Size (inside): H-10.5" x W-7.8" x D-4 1/4"
P-138
Series Multi Port Enclosure Size(inside): H-9" x W-6"
x D-3"
P-138FE Safe Box
This
multi-post housing is similar to the P-136
and features the "hidden hinge". This unit allows the
customer to customize with specific knockout ports. It also allows
for pole mounting.
Enclosure is shown with the F81 security locking device and standard
grommet in the main port. The enclosure has 5 sidewall cable entrances
as shown, as well as 5 cable entrances in the rear. For future
multi-media usage, an inner lid (not shown) can be made available.
Options: Custom hardware mounting available.
Private or custom labelling, security locking screw and custom
colors available on special order. 3/4" or 1" conduit
adapter grommet. Protection cap over the F81 security lock.
Material: Available in UV stabilized impact
resistant softer polymer or in UV stabilized and flame retardant
rigid plastic.
Cap over locking terminator
is optional. Hidden hinge under the left lid lip.
P-140
Series 2-Port Multi Purpose Enclosure, Size(inside): H-13"
x W-9.2" x D-4.1"
P-140 Rugged - Multi Purpose,
2-Port Housing, Basic
P-140R 2-Port Housing
This
popular 2 port housing has "moulded in" slide rails for
grounding blocks or splitters, "tie-downs" for holding
drop amplifiers and excess cable in place as well as mounting rails
for easy slip on/off of previously installed mounting brackets (P-140SC).
Standard color is grey.
Options: Private labelling, custom colors and
custom hardware mounting are available on special order.
P-140SC Accessory: Sliding Bracket
To
fit into the back slots of our P-140R cable enclosure, the P-140SC
mounting bracket attaches easily to a wall or siding. It can also
be used with the P-130, P-136
& P-138 enclosures.
Model
P-140 provides flexibility to meet the needs of most cable television
and telephony installations with space and depth for multiple
service runs in a variety of applications.
2 one inch entry ports with grommets, and 6 rear cable entries
provide the installer with easy cable access.
Options: special security screws, 3/4 "
or 1" conduit adapter grommets. Private labelling, custom
colors and custom hardware mounting are available on special orders.
F81 security locking device.
Materials: UV stabilized, flame retardant rigid
resin or a softer more plyable polymer.
P-140FYE
with extended solid legs for easy rear cable entry.
P140FE
Typical CATV Installation
P140FRE
Slotted Base for use with P140SC Siding Clip
Mount to: Pole, surface or onto prewire metal boxes
Entry port accepts up to 1” dia. cable bundles
P-140T Demarc Housing
P-140T
is a telephone demarcation point. Utilizing the P-137
Platforms, up to 12 lines can be terminated. The addition of the
over-ride locking mechanism allows secure customer access. Standard
color is gray.
P-140T with P-137 Platform and
custom hardware (shown left)
Options:Private labelling, custom hardware mounting
and custom colors are available on special order. Custom security
screws & leg extenders for uneven mounting surfaces or easier
rear cable entry, 3/4" or 1" dia. conduit adapter grommets.
Materials: UL approved flame retardant rigid
polymer. Detachable, slide-off heavy duty cover for maximum protection.
PWDS Multi Port Sealed,
Flush Mount Housing
This multi port
in-wall housing is designed to ensure the structural integrity
of building envelopes. Its innovative design directs moisture
away from building facades and the underlying structural
framework.
This sealed, self contained, housing features
a grounding terminating post, top and rear body knockouts
and a base entry port, which will accommodate a maximum
of 2" PVC conduit. Additional future wiring can be
accommodated through the front bottom grommet, without compromising
the water penetration protection.
The PWDS is available in a durable, UV stabilized,
flame retardant polymer to indure inclement outdoor environments
and maximize tamper resistance. It will readily accommodate
a multitude of telephone and CATV applications.
Inside Dimensions: H-7.7" x W-5.9" x D-5.6"
Specifications
Part #
Description
Common Application
Packaging
PWD6S
Multi port flush
mount housing with Splashboard, top and bottom
drip ledge, optional access port. Pipe adapter
optional
Telecom and custom
hardware
20/box
PWDSF
Multi port flush
mount housing with Splashboard, top and bottom
drip ledge, F81 connector, optional access port.
C/w pipe adapter.
CATV, FTTP, FTTH
and custom hardware
20/box
PWDSFE
Multi port polypropylene flush
mount housing with Splashboard, top and bottom
drip ledge, optional access port. C/w pipe adapter,
F81 connector.
Custom Hardware
20/box
RB8P In-Wall Indoor Housing
Flush mount in-wall housing. Standard color of lid is beige, standard color of box is grey.
Options: F81 security locking connector. Supra lock opening.
Size: H- 6.8" x W-8.3" x D: 3.7"
P234 Multi Purpose Housing
Weather proof design. Snap lock. Two attached pole mount brackets. Can be surface or pole mounted. Secure hinged cover with latch & scew cover. Standard color is grey.
Our newest P1000 Network Interface Device
(NID) is designed to accommodate active or passive
components for major FTTx and broadband market
that requires compact housing and compatible with
their latest products.
The P1000 is constructed using high impact and
flame retardant engineering PVC or optional high
temperature polycarbonate.
Features:
• FTTx and BroadBand markets.
• Weather proof design with optional Nema4X.
• Dual snap locks to ensure lid seals to base.
• 4 external entry points - 2 x 1" horseshoes and 2
x 3/4" knockouts.
• Mounting hole pattern.
• Security screw grounding post available.
Options:
• Nema 4X.
• Over ride lock or F81 lock.
• Gasket seal.
• Clear lid available.
• Custom logo.
• Custom security screw or self taping screw.
• 1" and 3/4" conduit adapters.
Features
• 4 Entry Ports: Two 3/4” & Two 1” diameter • Equipment mounting holes • Gasket Seal • 2 Base Knockouts • Dual snap
lid locks • Large Inner cavity allows ample room to work in • FTTP, FTTH, Telecom, CATV or custom applications • UV
Stabilized, Flame Retardant Polymer
Options
• 4 Port Placement Available at Top (for Indoor Use Only) or Bottom of Housing • Gasket Seal • Override lock, custom
security screw, F81 lock or self tapping screw • Conduit Adapters, Grommets • 3 Available Polymer Types • Flame Retardant
Rigid or Softer Non-flame Retardant Polymer • Network Equipment is Isolated From Customer Access Using Dual
Compartment Option
Inside Dimensions: H: 14.1” x W: 10.0” x D: 5.25”
Features
• Subscriber Compartment • 2 Base Knockouts • Equipment mounting holes • Dual snap lid locks • Large Inner cavity
allows ample room to work in • FTTP, FTTH, Telecom, CATV or custom applications • UV Stabilized, Flame Retardant
Polymer
Options
• 4 Port Placement Available at Top (for Indoor Use Only) or Bottom of Housing • Gasket Seal • Override lock, custom
security screw, F81 lock or self tapping screw • Conduit Adapters, Grommets • 3 Available Polymer Types • Flame
Retardant Rigid or Softer Non-flame Retardant Polymer
Inside Dimensions: H-14.1” x W-10.0” x D-5.25”
Features
• 4 Entry Ports: Two 3/4” & Two 1” diameter • Vented base • Equipment mounting holes • 2 Base Knockouts • Dual
snap lid locks • Large Inner cavity allows ample room to work in • FTTP, FTTH, Telecom, CATV or custom applications •
UV Stabilized, Flame Retardant Polymer
Options
• 4 Port Placement Available at Top (for Indoor Use Only) or Bottom of Housing • Gasket Seal • Override lock, custom
security screw, F81 lock or self tapping screw • Conduit Adapters, Grommets • 3 Available Polymer Types • Flame
Retardant Rigid or Softer Non-flame Retardant Polymer • Network Equipment is Isolated From Customer Access Using
Dual Compartment Option
Features:
• FTTP, FTTH, Telecom, CATV or custom
applications
• Weather proof design
• Dual snap locks to ensure lid seals to base
• 2 base knockouts
• 3 entry ports: one 3/4” & two 1” diameter
• Mounting hole pattern
• UL Approved
Options:
• Override lock or F81 lock
• Surge protectors and grounding bars
• Custom security screw or self tapping screw
• 1” & 3/4” conduit adapters
• Gasket Seal
• Inner hinged platform
• Vented base options: on backwall or two
side walls
• Optional deep cover (total depth 5.25”)
• Custom logo
Features:
• 4 Knock out entry points at the bottom –
3 x 1.00” and - 1 x 1.25”
• 2 x AC standard receptacles mounting
ports
• 10 entry knockout points at the top -
8 x 1.00” & 2 x 1.25” conduit adapters
• Polymer is rust and dent proof
• Ample room to work in
• Houses both cable and telecom service
provider equipment in one location for
easy service and hook-up
• Flush mount enclosure fits between 16”
studs
• Flame Retardent ABS Polymer Material
Application:
• The 30” enclosure provides a central
location for cable & telephone services
distribution set runs for residential
& commercial premises.
• Mounting hole pattern accommodates
1/4, 1/2 & full length expansion modules
in both vertical & horizontal arrangement
• Compatible with most standardized
patch panels, voice, data, video & audio
quick connect distribution modules
Inside Dimensions: H-30” x W-4.0” x D-3.5”
PT6 Multi Port NID Housing
This 3 port NID
housing features a rear entry port, 2 side knockouts, 1
interior LB knockout and pipe adapters for easy access.
The PT6 is manufactured to endure inclement
outdoor environments and maximize tamper resistance. The
upper conduit adapter accepts diameters of 1 1/4" and
2 1/2" steel, while the lower conduit adapter accommodates
diameters of 3/4", 1" and 2".
This multi-purpose housing, available with or
without the grounding harness is adaptable to both surface
and pole mount applications
Inside Dimensions: H-7.63" x W-5.9" x D-4.6"
Specifications
Part #
Description
Common Application
Packaging
PT6
Multi port housing
c/w pipe adapters
Telecom, FTTP, FTTH
and custom hardware
20/box
PT6F
Multi port housing
c/w pipe adapters, F81 security locking connector
CATV, FTTP, FTTH
and custom hardware
20/box
PT6FE
Multi port polypropylene housing
c/w adapters, F81 security locking connector
CATV and custom hardware
20/box
PL3 3 Line NID Housing
Features:
Weather proof design. 3 line NID housing can be surface, pipe or pole mounted. Standard color is grey.
Options:
Surge protectors and grounding bar or post, Security screw for inner lid and locking override. Terminating blocks
Features:
• CSA Approved. Supports up to 16 CATV outlets • Top and bottom drip ledges help maximize water protection • Can be painted to match buildings exterior color • Works well with Primex's PWD6S telecom housing. F81 locking connector • Top, side & back knockouts • Sealed weather proof design • UV stabilized, flame retardant polymer • Standard color is grey.
Options:
•Pipe adapter to join the PWD6S housing.
Inside Dimensions: H-13.5 "x W-8.5 " x D-6.4 "
F81
Lock, Insert & Tool
F81 Lock
F81 lock installation tool
F81 lock tool in use
F81 insert without lock F81
insert with lock installed
* F81 lock can be used with any part that contains
an ‘F’ in its part#. The ‘F’ denotes
the presence of an F81 insert.
P-123 Series 1-5 Port Enclosure, Size (inside):
H-3.2" x W-2.7" x D-1.7"
PT6 Multi Port NID Housing, Size (inside):
H-7.63" x W-5.9" x D-4.6"
UV
stabilized material for outdoors use. Protects installations against
damage, abuse and weather. Hinged cover stays open for easy installation,
leaving both hands free; tamper-resistant safety lock P-127
is optional. Standard color is gray.
Manufactured
of UV stabilized material to endure rugged outdoor environments;
protects equipment against abuse and weather. Tamper proof hinge
stays open for ease of installation.
P-126
can be customized with 1 to 12 terminating posts to meet
the requirements of your application: (P-126/11 shown at
right).
P-126/2
2-Port Housing, with 2 posts
P-126RAYCHE
P-126
P-126D
UV
stabilized material to endure rugged outdoor environments; protects
against abuse and weather. Detachable cover for easy equipment
installations. 5 cable entries in base floor as well as 2 front
entrance grommets, providing a versatile yet economical housing.
Shown
right, P-129/FUE in a typical CATV installation.
This
Single Port Housing is available with locking over-ride to accommodate
telephone or customer access. It will accommodate the 
Options:
Private labelling and custom colors are available on special order.
P130 is available in a UL approved flame retardant material or
in a more economical plyable UV stabilized material. The single
port is available with a standard flat grommet, or a 3/4"
or 1" conduit adapter grommet.
Offers
a unique hidden hinge, choices of a regular flat
grommet or a 3/4" or 1" diameter conduit adapters and
a variety of compartmental accessories (shown at right).
P-136
with inner security door closed and locked with optional locking
device. Shown with 4 protected terminating devices installed. A
segment of the inner lid & the breakaway partition P-136CP,
can be easily removed to accommodate up to 6 PDTs.
shown
with Inner Lid, dividers & F81 security locks
P-136/IL
Inner Lid
Can
be used in conjunction with the Inner Lid for security or alone
as a mounting plate for CATV splitters. 
Extended
lid to accommodate larger, bulkier accessories. Lid is 1 1/4"
deeper than regular P-136 lid.
This
multi-post housing is similar to the 
This
popular 2 port housing has "moulded in" slide rails for
grounding blocks or splitters, "tie-downs" for holding
drop amplifiers and excess cable in place as well as mounting rails
for easy slip on/off of previously installed mounting brackets (P-140SC).
Standard color is grey.
To
fit into the back slots of our P-140R cable enclosure, the P-140SC
mounting bracket attaches easily to a wall or siding. It can also
be used with the 
Model
P-140 provides flexibility to meet the needs of most cable television
and telephony installations with space and depth for multiple
service runs in a variety of applications.
P-140T
is a telephone demarcation point. Utilizing the 
F81 Lock 
