 Many
of the products we produce are used in utility or industrial environments.
A common Utility voltage is 110 volts DC. However power is required
at 24 VDC for SCADA or PLC applications. We produce a series of fully
isolated DC-DC voltage converters that convert 110 VDC (90 - 140 VDC
actual) to a fully regulated 27.2 VDC at 300, 600 and 1000 watts.
When provided with the optional paralleling diodes, multiple units
can be run in parallel for additional power or redundancy.
If the application calls for batteries at the 24 VDC level, we also
manufacture DC-DC battery chargers at 300, 600 and 1000 watts. |
|
Custom Power Requirements
We also offer custom-engineered power solutions up to 12KW. Working
closely with our customers, we can help you to better understand
and define your power conversion requirements.
We also offer full life cycle support for all our products, including
ongoing maintenance and repair services. We have a tradition of
maintaining long-term relationships with our customers who continue
to rely on our technical, manufacturing and project management expertise.
|
| |
| DC/DC Converters & Chargers |
 |
Our DC-DC voltage converters are also widely used
in industrial applications ranging from steel mills to factory
and distribution warehouses. Again voltage converters that convert
110 or 250 VDC to 24 VDC or other required voltages from 12
to 48 volts DC for control or communications are common applications.
Steel mills and other heavy industry applications are difficult
because the source voltage is very dirty, with many spikes and
ever voltage reversals on the input side. Over years of practical
experience, we have developed converters that are capable of
surviving and providing years of reliable service even in such
rough environments. |
|
| |
| Power Supplies for Forklift Applications |
 |
We are often called upon to supply fully isolated
DC-DC converters to produce 15 - 16 volts DC at 5 to 7 amps
from forklift 36 or 48 volts DC to run notebook computers. These
are a particularly tough applications as the thyristor based
motor drives for the forks and tires produce large amounts of
overlying AC on the batteries and will cause many converters
to fail unless proper input circuitry is used. We call this
the 'forklift' modification.
If your application is for any system where such motor drives
are used on the source voltage side let us know so we can make
the proper modifications. |
|
| |
| AC Inverters |
 |
Often AC power is needed for running computers
or other specialty equipment in industrial applications. The
IPS and IVS series of pure sine-wave inverters are available
from 100 to 10,000 watts to meet these needs. Input voltages
include; 12V, 24V, 48V, 72V, 125V, or 250 volts DC. The same
design and construction principles that have made us a respected
name in commercial marine power also apply to Utility and Industrial
applications. Our all aluminum, anodized or powder coated construction
using only 18-8 stainless fasteners make our products rugged
and durable. |
|
|
|
