The one-piece design of rigid vinyl features a highly
flexible hinge and self-locking latch. Holding cables to a one inch
bend radius, end-to-end connectivity can be maintained even when raceway
is filled to capacity. Sizes available: 3/4”, 1 1/4” and
1 3/4”. 1 3/4” listed below. Please note all Raceways
are Ivory color.
The system is self-supporting over a three foot span
when fully loaded with either fiber or copper cables and mounted using
recommended procedures. The system creates an end-to-end solution
for protecting cables from accidental cuts, kinks and their associated
signal loss. For ease of mounting, two kits are available, one for
mounting channel horizontally above equipment and one for mounting
channel vertically within equipment frames and cabinets. Raceway also
available in 4”x 4”and 4”x 8”sizes. Standard
color is yellow.
Ordering Information and Accessories
2"x 2" Solid
6 Ft . Channel with Cover (a)
2"x 2" Slotted 6 Ft . Channel
with Cover (b)
2"x 2" Horizontal
Elbow (c)
2"x 2" Horizontal
Tee (d)
2"x 2" Channel
Splice (e)
2"x 2" Vertical Tee (f)
2"x 2" Vertical
'Down' Elbow (g)
2"x 2" Cable Retainer (h)
Cable
Ladders
A complete line of 12” wide black powder coated
ladder racks are available and compatible with both retrofit and new
installations.
Ordering Information and Accessories
6’Length x 12”
Wide Straight Section (12 Pieces, Pictured)
10’Length x 12” Wide Straight
Section (12 Pieces)
90 Degree Horizontal
Bend (Pictured)
90 Degree Vertical Inside Bend (Pictured)
90 Degree Vertical
Outside Bend (Pictured)
Ladder End Splice Hardware (Pair)
Horizontal 90 Degree
Tee Splice Hardware (Pair)
Adjustable Horizontal Splice Hardware
(Pair)
Cable Ladder End Drop,
3 Spools Included
Cable Ladder Side Drop, 3 Spools Included
Ladder End Caps (12
Pack)
Ladder Wall Clamp (Pair)
Ladder Wall Support
Hardware (Pair)
Triangle Wall Support Bracket
Blank Panels
These 14 gauge steel Blank Panels have a black powder
coat finish.
Ordering Information and Accessories
Blank Panel, 1 Space
(1”)
Blank Panel, 2 Space (3”)
Blank Panel, 3 Space
(5”)
Blank Panel, 4 Space (7”)
Blank Panel, 5 Space
(8”)
Rack Mount Cable Tray
This cable tray mounts on most 19” racks. Tray
is 19” wide and 3” deep with black powder coat finish.
Cable
Ladders
