Permit Issuer Training
Permit issuers are considered management. In order to issue a permit the individual must be competent in three areas. They must know the work through experience, be able to delegate it in a safe and methodical manner, and know all the legislation surrounding the work. If a permit is not issued in a safe manner and injury or death results than the company is at fault, unless it can prove that the permit issuer received competent training.
Objective: To equip permit issuers with the skills & knowledge to fulfill their responsibilities as a competent permit issuer.
Duration: 16 hours [2 days]
Participants: Minimum 3/ maximum 12
Certification: Upon successful completion of testing, certificates of competency.
Program Content:
Day one:
  • Same as Entrants & Attendants Program.
Day Two:
  • Contents of the Confined Space Permit system.
  • Contents of the Hot Work Permit system.
  • Review safe work policies & procedures.
  • Review Ontario Regulations
  • Duties & Responsibilities of the permit issuer.
  • Personal protective equipment.
  • Fall Protection.
  • Rescue pre-planning.
  • Permit exercises
  • Note: The above session is carried out in the classroom with visits to permit required areas within the plant. Typically, Participants & instructor will review confined spaces with a high degree of difficulty.
  • Quiz
Auditing Services:

To evaluate the retention of training, field audits must be completed during confined space scope of work. This documentation is critical in demonstrating the competency of (your company) as a company. The audit supports and demonstrates that training was effective and competent. In the event a deviation is found, it will be noted [documented] and corrected with the participants immediately. Re-auditing will be carried out to support the correction. Again, every finding is documented. CRS may assist (your company) initially with on-going auditing carried out by the (your company) safety staff.
Related Products & Services
   

© Agents Private International Ltd.
& Liability Disclaimer		 Tel: 416-281-6902
Fax: 416-281-6904