• Wire Stripper & Cutter
• Plier, Lamp Cap Extractor
• Connector-Crimping Pliers with Side Cutters
• Heat Coil Pliers
• Lineman's B Side Cut Pliers
• Telecom Long Nose Pliers
• Telecom Long Nose D Pliers
• Long Nose G Pliers
• Telecom Diagonal Cutter Pliers
• Can Socket Wrench
• Can Wrench and Driver
• Guide Pin Screwdriver
• Screwdriver, Jeweler's Type
• Inspection Mirror
• T Key Tool

• Probe Pick
• Booth Wrench
• Coin Leveling Tool
• Key Slot Cleaner
• Lineman's Wrench
• DIP/IC Extractor
• Wire Extractor
• Lamp Extractor
• Cable Sewing Needle - Metal
• Wire Loop Puller-Metal
• Cable Sewing Needle - Insulated
• Wire Loop Puller - Insulated
• Cable Ring Tool
• Straight Metal Needle
• Cable Sheath Stripper

JIC-4473 New & Improved Wire Stripper & Cutter
The latest development in wire stripping & cutting. Simply place the wire in the stripping slot, squeeze, and pull. The wire is stripped and cut to the exact length required. Comes with cushioned ergonomic grips, interchangeable blades 22-24 AWG and 24-26 AWG. Features include a larger "V" opening on the pliers and no tools required for adjustments. Supplied assembled.

P/N Description JIC-4473 Wire Stripper and Cutter SB-2224 Replacement Blade 22-24 AWG SB-2426 Replacement Blade 24-26 AWG

S-42 Plier, Lamp Cap Extractor
For use in inserting and extracting switchboard lamp caps. The comfortable handles are yellow plastic dipped. 5" long.

P/N Description S-42 Plier, Lamp Cap Extractor

JIC-891 Connector-Crimping Pliers with Side Cutters
Connector-Crimping Pliers with Side Cutters designed to press UG, UR and UY connectors. A special stop behind cut out prevents damage to connectors. Utilized on combinations of plastic and pulp insulated 19, 22, 24 and 26 gauge copper conductors as well as 20 gauge plastic insulated copper steel wire. Comes with side cutter and yellow handle 6" long.

P/N Description JIC-891 Connector-Crimping Pliers with Side Cutters

PLS-5 Heat Coil Pliers
These pliers are designed for installing and extracting heat coils, fuses and other cylindrical shaped components. The thin shaped nose of the jaws allows access to tight restricted areas. These pliers are made of the highestquality heat-treated carbon tool steel for maximum strength and durability. They are machined in pairs to guarantee smooth mating of the surfaces for ease in opening and closing the jaws of the pliers.

P/N Description PLS-5 Heat Coil Pliers

JIC-683 Lineman's B Side Cut Pliers
Designed for heavy duty use in construction and maintenance work. These pliers are high leverage for cutting bolts, nails, and many gauges of wire including high-strength wire. Cutting edges cut clean and remain sharp. The cushioned-grip, comfortable handles are red plastic dipped to be approximately .007". 9" long.

P/N Description JIC-683 Lineman's B Side Cut Pliers

JIC-21257 Telecom Long Nose Pliers
Long nose have side cutting blades, a crushing slot, one .030" stripping hole, and a thin knurled nose to facilitate handling of the wire at the terminals. The comfortable handles are yellow plastic dipped. 7" long.

P/N Description JIC-21257 Telecom Long Nose Pliers

JIC-842 Telecom Long Nose D Pliers
Pliers are for general use looping, bending and cutting. Grips small wires and parts and reaches into tight spaces. Jaws are knurled, serrated and have side cutting blades. Cushion gripped yellow plastic handle 7" long.

P/N Description JIC-842 Telecom Long Nose D Pliers

JIC-056 Long Nose G Pliers
These pliers have jaws designed to close 700, 701 and 702 style connectors. This 6 5/8" plier has knurled jaws to facilitate gripping wire.

P/N Description JIC-056 Long Nose G Pliers

JIC-7858 Telecom Diagonal Cutter Pliers
Tapered nose diagonal cutting pliers with standard-bevel knives with .030" and .045" skinning holes, with crusher used for multipurpose wire work, with two V-shaped stripping notches. The comfortable handles are red plastic dipped. 6" long.

P/N Description JIC-7858 Telecom Diagonal Cutter Pliers

M-216C Can Socket Wrench
Double end can socket wrench. 3/8" and 7/16" hex, orange plastic handle in either our standard or ergonomic design. Used in placing fuses in cable terminals and connecting wires to fuses and binding posts. The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets. 7" long.

P/N Description M-216C/REX Ergonomic 1" Dia. Handle, Round Outer Socket M-216C/EX Ergonomic 1" Dia. Handle, Hex Outer Socket M-216C/RX Standard Handle, Round Outer Socket

M-216B Can Wrench and Driver
Spring loaded, both ends. .031" Screwdriver blades for residual nut and screw adjustments simultaneously, 3/8" and 7/16" sockets. 6 1/2" long overall, retracts to 5 3/8" long tool.

P/N Description M-216B Can Wrench & Driver

JIC-139B Coin Leveling Tool
Pay Telephone Tools
Tool used for leveling coins in coin collectors when the coin receptacle becomes so full as to interfere with operation of the collector. May also be used to measure the degree of fullness by means of a calibrated scale and metal slider. 7" long.

P/N Description JIC-139B Coin Leveling Tool

JIC-528A Key Slot Cleaner
Pay Telephone Tools
Interchangeable two tools in one. One formed rod produced from music wire is held in place by a chuck, while the other rod is stored in the pen barrel. Diameters of the rods are .024" and .035" thick. Used for cleaning and maintaining various mechanical devices. A popular use is cleaning out the key slots of the locks on coin telephone sets. 5" long.

P/N Description JIC-528A Key Slot Cleaner

JIC-650 Lineman's B Wrench
Forged and heat treated, this wrench is used on pole line hardware. It is open-end double-end type with two sizes of openings at each end and an oval hole for turning pole steps. The end openings accommodate nuts for 3/8", 1/2", 5/8" and 3/4" bolts and the head of the 1/2" drive screw. The faces of the wrench openings are offset to provide handle clearance.

P/N Description JIC-650 Lineman's B Wrench

Cable Sewing Needle - Metal
Durable red anodized aluminum handle with curved notched sewing needle. Designed to harness or lace multiple lead bundles. 5 3/4" long. Replacement Needles are also available.

P/N Description JIC-287 Cable Sewing Needle RB-287/6 Pkg. of 6 Replacement Needles

JIC-2257M Wire Loop Puller - Metal
Durable red anodized aluminum handle facilitates pulling wire through terminal blocks, rings on main frame or fanning strip holes. 8 1/2" long. Replacement wire loops are also available.

P/N Description JIC-2257M Wire Loop Puller RB-2257/6 Pkg. of 6 Replacement loops

Cable Sewing Needle - Insulated
This insulated cable sewing needle has a yellow lightweight molded grip handle that will harness or lace multiple lead bundles. 5 1/2" long.

P/N Description JIC-3209 Insulated Cable Sewing Needle

JIC-2257 Wire Loop Puller - Insulated
The durable and insulated wire loop puller facilitates pulling wire through terminal blocks, rings on main frame, or fanning strip holes. The yellow plastic lightweight handle fits snugly and is easy to hold in your hand. 8" long.

P/N Description JIC-2257 Wire Loop Puller

Cable Ring Tool
This cable ring tool is designed for cutting the sheathing of inside type plastic, fabric, or rubber covered cable 3/16", 1/4", 3/8", & 1/2". Durable metal handle. Tool is supplied with 1 replacement blade. 5 1/2" long.

P/N Description JIC-2060M Cable Ring Tool RB-2060/6 Pkg. of 6 Replacement Blades

Straight Metal Needle
This "Chicago Type" straight metal needle is designed for cable sewing. This handy tool, made of the finest steel, is for anyone in the cable industry. Needle is .016" thick and 12" long.

P/N Description JIC-284 Straight Metal Needle

Cable Sheath Stripper
Strip the jacket from all sizes of plastic and fabric covered cables without damaging the wire or insulation. Tough ergonomically designed handle protects the hand from being skinned or cut. The blade can be reversed for a new cutting edge, and a spare blade is included with the tool

P/N Description JIC-2878 Cable Sheath Stripper RB-2878/6 Pkg. 6 Replacement Blades

Cable Sheath Stripper & Ring Tool
Used for butting and stripping cables too large for hand held pliers. Use one blade to butt PVC sheatning and the second blade to strip the sheathing. Adjustble for .018" or .031" thick plastic, rubber or fabric insulation. Tough ergonomically desgned handle protects the hand from being skinned or cut. Blade can be reversed for a new cutting edge on the sheath stripper part of the tool. One spare blade of each style is included with the tool.

P/N Description JIC-4366 Cable Sheath Stripper & Ring Tool RB-2878/6 Pkg 6 Replacement Blades for Stripper Feature of the Tool RB-2060/6 Pkg 6 Replacement Blades for Ring Feature of the Tool