These products are designed to allow installation of several ducts at a time

The 23000 Series of Slings are manufactured from aircraft quality wire rope.  The various "legs" are staggered in length so the individual connections are not interfering with each other. 

The lead coupler can be dismantled to change out a leg or to add another leg.

Each leg is stamped with load capacity and they are pull tested to three times that rating. 

The sizes listed below are the standard sizes carried in stock - units can be specially made up to suite a customers request such as a 6 leg unit or even as many as 18 leg units have been made to order.

This product is ideal for multiple pulls of small ducts inside a large duct or casing.

In a directional drilling application, the user should be aware that the greater the number of legs, the greater the distance will be from the front link to the last leg and that may have an adverse effect on the duct being installed. For installations of large numbers of ducting, it is recommended that a DCD Multi-Puller Be used.