 Small,
simple and powerful, the 3GME is designed to overcome 3G deployment
obstacles.
Migration to advanced 3G wireless services has been limited
by the costs and complexities of delivering DS3 circuits to
cell sites. For example, severely limited cabinet or hut space
has meant that installation of DS3 capacity can require expensive
new enclosures and powering systems. Prevailing fiber solutions
are either exorbitantly expensive or limited to point-to-point
rather than efficient drop-and-continue topologies. And, future
growth has been limited by big up-front equipment investments
or products that are limited to support of just 3 DS3s.
The 3GME resolves these issues. Small, fast, easy to use,
exceptionally scalable and with integral drop-and-continue
support, the 3GME is designed to cut costs while delivering
next generation performance. Never strand capacity or resources
again. |
| Features |
- Industry's smallest, most affordable OC-3 to DS3
and DS1 platform (7.25" x 4.5" x 7.25").
- Up to 6 DS3s over one fiber pair with 1+1 Line Switched
Ring SONET Automatic Protection Switching (APS).
- Combinations up to 2 DS3s plus up to 28 DS1s with
APS over one fiber pair.
- Drop-and-continue DS3 support.
- Drop-and-continue DS1 support.
- DS1 grooming in drop-and-continue applications to
provide full access to DS3 bandwidth via inexpensive
14-port DS1 modules.
- DS3 and DS1 loopbacks via GR-499 FEAC codes.
- Available integral T1 "Smart Jacks" on
all DS1 ports with in-band NIU ("Smart Jack")
T1 loopbacks, full input level range (0 to -22.5 dB)
as well as DSX-1 level support and robust lightning
protection.
- 24V or 48V powering options.
- Available integral WDM module position to double
fiber utilization.
- Available mounted in a stand-alone Power Node+ pole
or wall-mounted outdoor enclosure (20" x 20"
x 8") with integral AC rectifiers, 8 hours of
battery reserve (including battery venting and heaters)
and T1 5-pin lightning protector blocks.
|
|
