O3D3 Modules
OC3 to DS3 Minature SONET Multiplexer
 
The O3D3 is designed to interface with WDM 1550nm or standard 1310nm optics. One O3D3 shelf can replace several bays of conventional SONET equipment for significant cost savings.
The O3D3 Miniature SONET Multiplexer is the smallest, most cost-effective OC3/SONET-to-DS3 Multiplexer available. Part of a complete family of products, the O3D3 is designed to interface with Wave Division Multiplexing (WDM) 1550nm or standard 1310nm optics to provide a DS3 port where and when needed. A boon to outside plant operations where space is at a premium, the O3D3 is small enough to provide multiple circuits from cramped Remote Terminal (RT) cabinets, virtually eliminating the need for large and expensive traditional SONET Multiplexers.

Ideal for virtually every DS3 application - Remote DSLAMs, Remote ADSL miniRAMs, ISP and CLEC DS3 hand-offs, NGDLC RT-to-subscriber DS3 delivery, or office building virtual coax circuits - the O3D3 offers cost-effective, dependable, and easy to deploy fiber access. The O3D3 revolutionizes DS3 service delivery by following the successful T1 transport model: easy to use, plug-andplay self-contained circuit packs that are small, simple and standardized. The “plug-and-play” O3D3 Miniature SONET Multiplexer eliminates complicated computer terminal training and time-consuming provisioning, while standard GR-253 SONET, GR-499 DS3 and NEBS compliance provides the interoperability required for seamless network operation.

 
OC3 to 3 DS3 Minature SONET Multiplexer
 
The O3-3D3 features three DS3 ports for maximum bandwidth utilization and one OC3 port, plus a second optional OC3 port for integral fiber protection switching.

 

 

Part of our complete O3D3 OC3-to-DS3 Miniature SONET Multiplexer family, the O3-3D3 is designed to derive three DS3 circuits from an OC3 1550nm or 1310nm optical facility, with a second optional OC3 port available for fiber protection switching. Compact, inexpensive and easy to deploy, the plug-and-play O3-3D3 works “hand-in-glove” with our full assortment of O3D3 modules and WDM couplers, offering a simple, pay-as-you-go migration from 1 to 6 DS3s over 2 fibers. Drop-and-Continue Ring Capability with or without integral Protection Switching, Point-to-Point Application support, as well as climate-hardened, standard Type 400 mechanics for unrestricted deployment in CO, OSP and CPE mountings, make the O3-3D3 an effective solution for overcoming fiber exhaustion, expanding existing network capability, and deferring the cost of additional fiber deployment - virtually eliminating the expense, complexity and size limitations often associated with traditional SONET multiplexers.

Easy to install and use, the plug-and-play O3-3D3 unit features 3 DS3 ports with individual DS3 status LEDs, along with a single OC3 port and status LED. The O3-3D3P features a second OC3 port and status LED for integral switch-to-protect capability. Each offers front panel provisioning of DS3 Length and DS3 Operating Mode (point-to-point or drop and continue), comprehensive standard DS3 75-ohm BNC connections and standard fiber SC interface connectors. Local and remote alarm monitoring and loopback capability allow rigorous network and maintenance monitoring. Medium-range optics units economically support fiber facilities up to 40 Km, while extended-range (ER) optics units support applications up to 80 Km.

 
O3D3 Switch-to-Protect PROT Module

The PROT Module provides Switch-to-Protect capability for Type 200™ Mechanics O3D3 units, ensuring virtually uninterrupted network transmission for Service Level Agreement (SLA) compliance.

The simple, climate-hardened, “plug-and-play” modules feature standard front-panel DS3 75-ohm BNC connections, and front-panel status LEDs to indicate the active link. The unit is mounted along with a pair of O3D3 L2 series units in the CO 3O3D3-23L4 3-position, 23”rack-mounted shelf, or the CPE 3O3D3 CPL4 3-position shelf with locking cover.

O3-3D3 units do not require the PROT for Switch-to-Protect configurations.

Related Products & Services
   
© Agents Private International Ltd
. & Liability Disclaimer
Tel: 416-281-6902
Fax: 416-281-6904