|
| |
|
Rescue Stretchers |
 |
- Top rail is a full one-inch diameter, makes it easier
to handle when carried for extended periods
- Durathene netting, eliminates cuts, scrapes caused by
broken wires
- Molded back support, high density polyethylene for greater
durability
|
|
| |
Vertical
Stretcher Harness  |
 |
- All hardware meets NFPA & Military Spec.
- O Ring used for the top tie-in point rated at 25,000 lbs.
- Parachute buckles on each of the four legs allow adjustability
- Rated strength of the harness: 5,000 lbs. (22kN)
- 20ft. tender line and a nylon storage bag included.
|
|
| |
SKED Stretcher System |
 |
- SKED Basic Rescue System comes
complete with the stretcher, Cordura nylon backpack/towing
harness, two straps, horizontal lift slings, vertical lift
sling, one large steel carabiner, and four removable web
handles.
- Storage bag is 36 inches long by 9 inches in diameter.
- System weight: 18 lbs.
- SKED Pediatric Rescue System is a down-size version for
children and small adults.
- Comes with the same accessories, but with a smaller storage
bag.
|
|
| |
|
| |
Horizontal Lifeline System |
 |
Maximum of 2 workers, for
temporary application only
HLLKxx
KIT CONTAINS THE FOLLOWING ITEMS:
- (2) Web anchors made of nylon webbing with forged D-ring
capacity 22 kN (5,000 lbs.) Each, 36" long (90 cm)
- (1) Horizontal lifeline made of 5/8" dia. nylon rope with
two CSA approved shock absorbers in parallel at one end
and other end spliced back to retain a model LRX steel,
spring loaded, rope adjuster.
- (2) NK-18MM carabiners (1) carrying bag
- Last 2 digits indicate length. HLKK35 = 35ft. lifeline,
HLKK65 = 65ft. lifeline
|
|
| |
|
| |
Ladder Systems & Accessories |
 |
| NWL-KIT040 Ladder System includes: |
- Ladder -custom length specified
- Carrying Bag
- Web anchors
- Carabiners
|
| NWL-040 Ladder: |
- Custom made to length
- Fibreglass runs
- Loops incorporated for carabiner
- Last 3 digits indicate length of ladder
- Pull-tested to over 2,000 lbs.
|
|
 |
|
| |
RAM
Safety Cable System |
  |
- Stainless steel construction for corrosion protection
and ling life.
- Fall arrester can be attached or removed from the cable
at any point.
- Fall arrester has built in mechanism to prevent installing
it in the upside down position.
- Arrests fall within 6" to minimize impact forces on climber
and structure.
- Hands free operation.
- Once installed on the cable with the supplied carabiner,
the fall arrestor cannot be unintentionally removed from
the cable.
|
|
| |
RAM
Safety Rail System |
 |
-
Lightweight aluminium construction for corrosion protection and long life.
- The asymetric extruded rail makes it impossible to install the trolley upside down.
- The trolley mechanically engages to arrest the fall within inches to minimize impact forces on climber and structure. Energy
absorber not required.
|
|
|