|
|
Single-Mode Single-fiber TX: 1310nm RX: 1550nm (20km): EL200CA-20
Single-Mode Single-fiber TX: 1550nm RX: 1310nm (20km): EL200CB-20
Single-Mode Single-fiber TX: 1310nm RX: 1550nm (40km): EL200CA-40
Single-Mode Single-fiber TX: 1550nm RX: 1310nm (40km): EL200CB-40
|
|
|  The
EL200 Series provides LED indicators for PWR, 10/100, LNK/ACT,
and FDX/COL states. The Link-Fault-Pass-Thru feature enables
the disconnection of fiber cable be passed through the copper
port and detected by other SNMP capable network equipment.
The EL200 Series fully complies with Ethernet/Fast Ethernet
standards and provide one port that auto-negotiates at 10/100Base-T/TX
and a 100Base-FX Single-Mode Single-fiber port with SC connector.
DIP switches at the back panel allows user to select five
different& modes for the TX port: Auto-negotiation, 10M Half-duplex,
10M Full-duplex, 100 Half-duplex, and 100M Full-duplex.
It functions as a converter as well as a two-port switch.
Link-Fault-Pass-Thru provide the function that acknowledges
the user when there's a broken fiber link on a particular
node/side of the connection.
Both of the EL200CA and EL200CB are powered by external power
supply adapter. Installation of EL200 is simple and straight
forward. |
|
|
| Features |
- EL200A: Transmit(TX) at 1310nm wavelength; Receive(RX)
at 1550nm wavlength
- EL200B: Transmit(TX) at 1550nm wavelength; Receive(RX)
at 1310nm wavlength
- Provides one port of 10/100Base-T/TX with RJ-45 connector
and one port of Single-fiber Single-mode SC fiber connector
- DIP switches for RJ-45 port mode setting: Auto-negotiation,
10M half-duplex, 10M Full-duplex, 100M Half-duplex, 100M
Full-duplex
- Link-Fault-Pass-Thru enables the disconnection of fiber
cable be propagated through the RJ-45 copper port
- Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX,
100Base-FX standards
- Store-and-forward switching mechanism
- LED Indication: PWR/ACT/LNK/FDX/SPD/COL.
- Wall-mountable
- 1024 MAC addresses
- Extended Single-Mode fiber optic distance up to 75km (46.6ml)
- One push button for crossover cable or straight cable
for TX port
|
|
|
| Specifications |
| LED Report: |
Per Unit - Power Status, Speed Per Port - LNK/ACT,
FDX/COL |
| Ethernet Standards: |
IEEE 802.3 10Base-T; IEEE
802.3u 100Base-TX/100Base-FX |
| Cable:
|
10Base-T 2-pair UTP CAT 3,
4, 5, up to 100m (328ft)
100Base-TX 2-pair UTP CAT 5, up to 100m (328ft)
100Base-FX 10/125um Single-mode fiber optic cable, up
to 15km |
| Forwarding Rate: |
14,880pps for 10Mbps; 148,800pps
for 100Mbps |
| Environmental: |
Operating Temperature: 0ºC
- 40º C (32ºF - 104º F)
Storage Temperature: -25ºC - 70º C (-13ºF -158º F) |
| Humidity: |
10 - 90% (non-condensing) |
| Power: |
External AC/DC required,
12VDC, 0.5A universal power supply. Power consumption:
12VDC, 0.6A, 7.2W |
| Dimensions: |
W109.2mm x D80.3mm x H23.8mm
(4.29" x 3.27" x 0.94") |
| Emission Compliance: |
FCC part 15 Class A, CE Mark,
VCCI Class A |
| Net Weight: |
0.8kg (1.7lb) |
|
|
| 
|
Ordering Information -
EL200 Series  |
| Part
No. |
Port One |
Port Two |
| Connector
Type |
Speed |
Distance |
Connector
Type |
Optical
Wavelength |
Distance |
| EL200CA-20
|
RJ45 |
10/100mbps |
100m |
SC Single
Fiber |
TX: 1310nm
RX: 1550nm |
20km |
| EL200CB-20
|
RJ45 |
10/100mbps |
100m |
SC Single
Fiber |
TX: 1550nm
RX: 1310nm |
40km |
| EL200CA-40 |
RJ45 |
10/100mbps |
100m |
SC Single Fiber |
TX: 1310nm
RX: 1550nm |
40km |
| EL200CB-40 |
RJ45 |
10/100mbps |
100m |
SC Single Fiber |
TX: 1550nm
RX: 1310nm |
40km |
|
|
|
|
|
|
