|
D550 SHARK Digital Signal Identifier  |
 Introducing
the industry’s only non-metallic, non-intrusive Digital
Signal Identifier.
Comfortable to hold and easy to use, the light, but rugged
D550 SHARK is a breakthrough in Digital Signal Identification
on copper pair cables. It eliminates accidental downtime (and
unnecessary repair calls) on active copper pair cables due
to metallic access.With adjustable signal sensitivity the
D550 SHARK can be used at any distance from the CO or repeaters.
The SHARK provides a non-intrusive method of identifying
digital signals in bundles of wire. Simply by touching the
wire insulation with the probe, never causing damage to the
wire, the SHARK gives both audio and visual indications of
an active digital signal. The SHARK takes the guess work out
of which wire to cut or splice. |
|
| Features |
- Hand-held, Rugged, Lightweight,
and Battery Powered
- Operated with one hand
- High Impact, Ruggedized Case
- Weighs less than 1 lb.
- Uses 9 volt battery
- Live Copper Pair Identifier
- Non-intrusive Signal Detection
|
- -32 dBdsx Signal Sensitivity
- Useful on SF, ESF, SLC 96* and ISDN
Systems
- Also detects 56Kb/s and 64Kb/s
- Easy To Use
- Adjustable Sensitivity
- Audio and Visual Indicators
- Easily Accessible Battery Compartment
|
|
|
| Ordering Information |
| Part
No. |
CLEIŪ Code |
Description |
| 30550020 |
T1ETE266AA |
D550
Shark (Grey): |
| 30550030 |
|
D550 Shark (Red): |
|
|
|
|
|
| D560 Non-Intrusive Digital Testing Probe |
 Introducing
a revolutionary new design to provide non-metallic, non-intrusive
access to T1 carrier span lines for testing purposes. The
D560 provides a technician non-metallic access to a T1 signal
on insulated twisted pair without affecting the signal being
monitored.
When used with a T1 Test Set, the user can perform tests
as though tied directly to the copper wires. Jack the bantam
plug into any compatible T1 Test Set and clip the probe tip
onto the twisted pair. The self powered unit operates as though
jacked directly into the system with metallic connectors. |
|
| Features and Benefits |
| Easy to
Use, Simple to Operate |
The D560 handheld digital
probe's ease of use makes trouble shooting T1 systems
a snap, whether up a pole, down a manhole or in the Central
Office. |
| Complete
Performance Monitoring |
Bit Error performance,
Frequency and level of DS1, Frequency and level of DS0,
General T1 performance parameters
|
| Non-Metallic
Access |
The D560 offers complete
T1 monitoring without the downtime spent looking for a
metallic access. |
| Independently
Powered |
The D560 is a self-powered
digital probe that requires no power from the T1 Test
Set that is jacked into. |
| Economical |
The low cost makes it easy
for every technician's tool kit to be provisioned with
the D560 Digital Probe. |
| Battery Operated
for Field Use |
The D560's AA Alkaline batteries
provide greater than 10 hours of continuous use.
|
|
|
| Ordering Information |
| Part
No. |
Description |
| 30560010
|
D560 Non-Intrusive
Digital Testing Probe |
|
|
| |
|
|
|
